Lightning strike disrupts transmission of Utah broadcasters

Sep 17, 2009 9:16 AM

             
Utah’s shared transmission tower atop Farnsworth Peak

Lightning struck DTV Utah’s shared transmission tower atop Farnsworth Peak Sept. 13, knocking eight stations off the air for a time.

Lightning struck a television transmission tower atop Farnsworth Peak about 17mi southwest of downtown Salt Lake City Sept. 13 taking eight full-power DTV stations off the air.

The incident, which occurred at about 9 p.m., knocked four of the stations off the air for about 90 minutes. DTV transmission resumed for the remaining four stations at about 1:30 a.m. on Sept. 14, said KSL chief engineer Brent Robinson.

The stations included: KSL, the Bonneville International-owned NBC affiliate in Salt Lake City; Four Points Media Group-owned CBS affiliate KUTV in Salt Lake City; Newport Television-owned ABC affiliate KTVX in Salt Lake City; PBS member station KUED in Salt Lake City; Utah State Board of Regents station KUEN in Ogden, UT; PBS member station KBYU in Provo, UT; Larry H. Miller-owned KJZZ in Salt Lake City; and High Plains Broadcasting-owned CW Television affiliate KUCW in Ogden, UT. DTV Utah, an alliance of the stations, operates a shared RF infrastructure on Farnsworth Peak, which includes two combiners — one each for four channels — and two antennas in the main structure — one of which sustained the lightning strike — as well as a backup antenna.

The lightning strike of the tower caused a failure of the waveguide switch control system, said Robinson. “The strike put one of the combiner chains into an illegal condition, which caused the output (of one of the combiners) to be fed back into the input (of the other combiner),” he said.

The DTV Utah transmission facility on Farnsworth Peak

The DTV Utah transmission facility on Farnsworth Peak is working properly at full power and the situation continues to be monitored following the lightning strike, says KSL chief engineer Brent Robinson.

According to Robinson, the damage from lightning included disrupting the waveguide switch control panel, which displayed invalid information following the strike. With the assistance of an engineer familiar with the details of the combining system via phone, the on-site RF engineer was able to determine what happened, take corrective steps and begin turning on KSL, KUTV, KUED and KJZZ –the stations not directly involved in the incident, he said.

“The other remaining stations (KTVX, KUEN, KBYU and KUCW) were on the combiner that blew,” said Robinson. “Oil was leaking all over the place. We were worried about the condition of the antenna, combiner and waveguide.”

By early the next morning, engineers were satisfied that everything was in working order and it was safe to resume transmission of the remaining stations. According to Robinson, who was interviewed via phone Sept. 16, everything at the Farnsworth Peak site is working properly at full power and the situation continues to be monitored.

According to Robinson, the incident illustrates the fact that nothing is foolproof. Currently no decision has been made about what to do with the control system that failed. Replacement is an option, said Robinson. “Or, we could just leave it in the manual position with templates to guide engineers on making configuration changes when necessary,” he said.




Want to use this article?
Click here for options!
Get Copyright Clearance

Share this article

blog comments powered by Disqus

 

Current Issue

2012 NAB CONTINUING COVERAGE

April 2012

In addition to the almost 200 products featured in the March issue, this month we’re happy to present more products....

Read More articles...

Related Newsletter

RF Update
provides readers with news on DTV-related issues including: FCC actions, industry news and station build-out updates.

Related Posts


Confused about the terminology in an article? Find definitions of common terms and abbreviations in Broadcast Engineering's Glossary.

 


Video Compression, Editing and Displays

Video Compression, Editing and Displays

Video compression, editing and displays is an in-depth tutorial on MPEG compression technology, editing MPEG content and evaluating color video monitors written by long-time video expert, trainer and writer Steve Mullen, Ph. D.

File Based Technology and Workflow

File Based Technology and Workflow

File-based technologies have replaced video tape methods for a majority of production and broadcast operations. The worlds of AV and IT are coalescing to create new methods and workflows for media

Sound Off Podcasts

 

Broadcast Engineering Digital Reference Guide

Browse Back Issues

Back to Top