One of the most overlooked aspects of broadcast operations is the actual technology required for the origination of content. Studio shows, remote feeds and telecine conversions are considered generic content sources. Yet, the actual transmission of this content either from the field or from the studio to the transmission site is sometimes taken for granted.
Collectively, these activities are categorized as Broadcast Auxiliary Services (BAS). The FCC defines BAS as an RF system used by a radio or TV station that is not part of its direct broadcast to listeners or viewers. These are channels not intended for consumer viewing, but rather to get signals to (or from) a transmitter or a remote OB vehicle.
Microwave frequencies in the 2GHz, 7GHz, 13GHz, 18GHz and 23GHz band are used in the U.S. These video channels are reserved in each DMA for BAS terrestrial microwave communications, with frequency coordination typically handled by the local SBE chapter.
BAS can be broken down into categories:
- Studio-Transmitter Link (STL)
- Transmitter-Studio Link (TSL)
- InterCity Relay (ICR)
- Remote Pickup Unit (RPU)
- Electronic Newsgathering (ENG)
Studio-transmitter links (STL) and transmitter-studio links (TSL) have been in use since the earliest days of broadcasting. With a two-way microwave link, a studio operator can monitor remote sites and conduct problem diagnosis. The ATSC has issued CS/TSG-696r1, "Candidate Standard: ATSC Automatic Transmitter Power Control Data Return Link Standard," which outlines key operating and control parameters for such links.
Intercity Relay (ICR) is used for relaying broadcast TV signals between two points, such as a main studio and an auxiliary studio.
A Remote Pickup Unit (RPU) is used to send program material from a remote location to the broadcast station or network.
Electronic Newsgathering (ENG) uses point-to-point terrestrial microwave signals in the 2GHz band to backhaul the remote feed to the studio. ENG is generally done using a specially modified truck or van. Terrestrial microwave vehicles usually have masts that can be extended up to 50ft to allow line-of-sight communications.
BAS goes digital
As with terrestrial program broadcasts, BAS systems benefit from digital technology. Perfect transmission until the digital cliff is hit ensures the pristine quality of remote content backhauled to the operation center and of program content sent to the transmitter site.
A digital BAS system consists of an MPEG-2 encoder, digital COFDM modulator and digital upconverter. VSB and QAM digital modulation is also often used, and some equipment vendors offer an MPEG-4 AVC compression option.
A COFDM signal works down to -94dBm as compared to -85dBm for analog threshold receiver levels. Even with a lower received signal, however, COFDM typically out performs analog for both signal capture and multipath rejection.
A perfect COFDM spectrum would be rectangular, but operation of amplifiers and mixers in nonlinear regions produces noise on the sides of the signal. This noise is called sideband regrowth. Regrowth levels can be 25dB-40dB, which can cause interference problems.
An in-depth discussion of digital microwave systems can be found at vendor Web sites:
"COFDM and Narrowband FM vs. 17MHz FM Technology"
Replacing Analog Links with Digital Links for STL or Intercity Relay
COFDM versus QAM and VSB in ENG/HD-ENG.
The transition to digital BAS also includes services in the 7GHz and 13GHz bands. Channel bandwidth has been reduced to 12MHz from 17MHz. The center frequencies have also been changed. Digital modulation will help stations comply with the new FCC requirements. This has prompted stations that have not moved to digital operation to do so when they switch their operating frequencies.
Analog spectrum reclamation impacts BAS
The reclamation of TV spectrum as analog stations shutdown should have no effect on a service operating at these frequencies. There were concerns, however, that cell phone services operating in the 700MHz-800MHz range would produce adjacent channel interfere with new emergency communications authorized to operate at this frequency range.
On Aug. 6, 2004, the FCC rendered a decision to resolve the potential interference issue. As a result, cell phone services, specifically those of Sprint Nextel, are now moving into the 2GHz band occupied by BAS. This requires massive changes for broadcasters.
- Sprint Nextel will vacate its 700MHz-800MHz channels in return for frequency allocations at 1910MHz-1915MHz and 1990MHz-1995MHz.
- Sprint Nextel will compensate broadcasters' relocation of BAS and other services operating in the 1990MHz-2110MHz and 2025MHz-2110MHz range.
The deadline for all changes is September 2007.
Progress to date
George Maier, in a recent Broadcast Engineering magazine article, "The 2GHz relocation: A midterm report card" details the history and state of the relocation program as of mid-2006.
There are 1098 BAS licensees that have been broken down into eight regions. Sprint Nextel's 2GHz relocation team reports that mid-Atlantic, West and Northeast stations have 100 percent of their station inventories submitted to the Sprint Nextel online tool. Frequency relocation agreements (FRA) have been signed with the Hearst-Argyle-owned station in Orlando, FL, and Tribune-owned station in Chicago.
Yuma, AZ-El Centro, CA, was the first TV market to relocate to the 2GHz spectrum band. KYMA-TV, a Sunbelt Communications-owned NBC affiliate, replaced its analog equipment and switched over to digital last September.
By most accounts, progress has been relatively slow, and it appears that it will be difficult to meet the September 2007 relocation deadline.
MSTV discusses issues regarding TV translators in its Reply to Opposition of Sprint Netxtel Corporation.
SBE reports on BAS events in a White Paper on RM 11308.
An article called "Git 'er Done!"
by Chris Imlay, SBE general counsel, discusses the recent state of the BAS relocation program.
A Summary of Changes to the Part 74 BAS Rules, compiled by Dane E. Ericksen, P.E., CSRTE, chairman of the SBE FCC Liaison Committee, is also available.
FCC BAS information can be found at their microwave Web site.
E-mail your thoughts, experiences and suggestions for future topics to firstname.lastname@example.org with the subject line T2D.